Its reduced size, multidirectional hydraulic connections and being fully equipped allows it to be installed anywhere quickly and easily. The fumes can be removed through gas outlet pipes, with no need for an external chimney, reducing installation costs. Main inlet wiring incorrectly wired, 4. Filling Method 2: Filling Loop Fig. This is obtained by making use of the combustion gas condensation effect, achieving up to 30% savings compared to conventional boilers.
The Company takes every reasonable care to ensure that these products are designed and constructed to meet these general safety requirements, when properly used and installed. Its compact, wall mounted and slim vertical design only 165mm wide is specifically aimed at small spaces and can even be sited in a small airing cupboard alongside a cylinder. It requires no magnesium anode, avoiding costly inspection and maintenance operations for the domestic hot water tank. Ensure all fittings are made water-tight. Voltage drop less that 207V, or 5. This version also includes a 130-litre stainless steel hot water tank for a simultaneous supply of plentiful domestic hot water at several points of consumption.
As it doesn't use air from the room it can be used in rooms without ventilation, therefore making its placement simple. The gas temperature must be reduced below the dew point in order to take advantage of the condensation effect. Refer to Ventilation Requirements Page 7 for 1. After Sales Service Information 3. Faulty thermistor or thermistor wire connection, 3. The gas temperature reduction is achieved by the stainless steel condensing unit.
Trianco cannot accept any responsibility for breakdowns or damage caused by incorrectly-fitted systems. This may necessitate alterations to this specification. Refit the pump and fill the system. Main inlet wiring incorrectly wired, 4. In both cases, where any 7. As the boiler does not use the air from the room it is located in, it can even be installed in rooms without ventilation. Connect each boiler to each phase.
You will be provided with the d The appliance has not been correctly installed as name and telephone number of your nearest recommended within these instructions. This is suitable for a system with a static components, all integral to the running of the appliance. Main terminal block is short circuiting, or 3. This is obtained by making use of the combustion gas condensation effect, achieving up to 30% savings compared to conventional boilers. These instructions should be kept in a place close to the appliance for easy reference. Voltage drop less that 207V, or 5.
Voltage Drop If the voltage drops below 207 volts. Description Aztec Classic — a superb heating choice Available in outputs of 2kW-12kW the Aztec Classic has furnished thousands of homes across the U K over the last decade. Element Cable damage or loose, or 4. The boiler produces hot water for a fully-sealed system by passing water over electric heating elements which are housed in an insulated stainless steel heat exchanger. Ensure that the area surrounding the boiler is kept free of items Information for the Installer and Service Engineers which would impede the good ventilation of the appliance e. As it contains 2 elements, in this case the 4kW model will continue to operate safely at a Should the boiler fail to start for any reason, please make the reduced output. If in doubt, seek expert advice.
The cast iron combustion chamber has 2 wattages 30 and 40 kW , guaranteeing a long product lifetime. This way, cold returns can be achieved and therefore low smoke temperatures even for producing hot water taking advantage of the latent heat to reduce consumption. Servicing Instructions Slide top casing upwards this will allow front casing to slide forward. Loose recommended that you have your boiler serviced once a year. The fumes can be removed through gas outlet pipes, with no need for an external chimney, reducing installation costs.
The modulation also allows the continuous adaptation of the power of the boiler and the requirements of hot water consumption at any time, letting the boiler work at lower temperatures. This range has a cast iron combustion chamber, with 2 wattages 30 and 40 kW , and is available in 2 versions heating only and heating + instant domestic hot water. Where design information is not complete the following chart Page Vent all air from the system. As the boiler does not use the air from the room it is located in, it can even be installed in rooms without ventilation. It can be installed in any type of property i. Main terminal block is short circuiting, or 3. To ensure the continued safe and reliable operation of the boiler, it is recommended that it is serviced at least once a 2 Remove the front casing as described above.